ZTY800 diesel locomotive

Technical parameters and main configuration

Execution standard

1.JB/ t3247-1991 general technical conditions for industrial and mining diesel locomotive

2.TB/ t2494.1-1994 track vehicle axle ultrasonic inspection method

3.GB/ t3314-2006 general technical conditions for diesel locomotive

4.GB/ t3450-1994 "allowable noise value of locomotive driver's cab"

5.TB/ t449-2003 outline of wheel rim tread for rolling stock

6.TB/ t1025-2000 technical conditions for hot coil coil compression springs for rolling stock

7.TB/ t1444-2002 technical conditions for rubber seals for internal combustion engines in vehicles

8.TB/1463-2006 technical conditions for locomotive wheelset assembly

9. Tb1580-1995 welding technical conditions for newly built rolling stock

10.TB/ t2441-1993 technical conditions for assembly of rolling bearing axle box of diesel locomotive

11. TB/T 2817-1997 rolling steel integral vehicle technical conditions for railway vehicles

12.TB/T 2945-1999 LZ50 steel axles and billets for railway vehicles technical conditions

一、Main configuration

The diesel engine                            KTA19-C790康明斯柴油机

The transmission way              Hydraulic transmission

brake                           Jz-7 single machine brake

Braking way               Air brake and hand brake

Coupling type                  Locomotive 13 upper acting coupler

二、Main technical parameters

power                                                          790 hp

Maximum tonnage of traction (straight)         3160 t

A top speed of                                             15 km/h

Through the minimum curve radius               60 m

gauge                                                         1435 mm

The wheelbase                                           1800 mm

distance                                                       5000 mm

Axial flow type                                               B-B

Coupler height                                              880 mm±10 mm

Preparing a weight                                      About 80 t

The wheel diameter                                  840 mm

Length x width x height (mm)                      12640×3000×3900

三、Main engine parameters

四、Main parameters of hydraulic torque converter

五、Hydraulic stepless transmission

六、Traction characteristics of traction locomotive

Traction tonnage list for traction locomotive

Note: the above traction tonnage table of traction locomotive is the traction weight without curve. If there are both ramps and curves, the traction weight will decrease with the curve radius.

七、Major outsourcing parts supporting manufacturers

八、Quality assurance and technical service

1. The warranty period is one year. The calculation starts after the locomotive is transported to the test and acceptance.

2. The supplier shall be responsible for the reliability, integrity and performance of the locomotive.

3. During the warranty period of the locomotive, the supplier shall be responsible for the defects caused by the design, process and materials of the locomotive and correct them at its own expense.

4. The supplier shall provide free training for the passenger.

5. The supplier shall provide the user manual and relevant technical data free of charge.

6. During the warranty period, if there is any problem with the locomotive, the supplier shall send someone to the site to deal with the problem within 48 hours after receiving the notice from the buyer.

7. Upon expiration of the warranty period, the supplier shall provide technical services free of charge.

ZTY800 diesel locomotive

A list of goods to be delivered on board

一、 Wearing parts list

二、 Vehicle delivery tool list

三、 The accessory file

ZTY800 diesel locomotive