Type ZTYS1000 internal combustion locomotive (dual power)

Operating conditions, technical parameters and main configuration

一、ZTYS1000 type diesel traction locomotive (hybrid), in use process, when need drawing large tonnage, two engine unit can work at the same time, the power is: 1000 horsepower unit/double, maximum traction tonnage: 4200 tons, when traction small tonnage, single engine unit work alone, its power is: 480 horsepower per single unit, the maximum traction tonnage: 2100 tons, which can satisfy the using condition, but also to reduce fuel consumption, reduce the cost and prolonging the service life of the locomotive.

二、Execution standard

1.JB/ t3247-1991 general technical conditions for industrial and mining diesel locomotive

2.TB/ t2494.1-1994 track vehicle axle ultrasonic inspection method

3.GB/ t3314-2006 general technical conditions for diesel locomotive

4.GB/ t3450-1994 "allowable noise value of locomotive driver's cab"

5.TB/ t449-2003 outline of wheel rim tread for rolling stock

6.TB/ t1025-2000 technical conditions for hot coil coil compression springs for rolling stock

7.TB/ t1444-2002 technical conditions for rubber seals for internal combustion engines in vehicles

8.TB/1463-2006 technical conditions for locomotive wheelset assembly

9. Tb1580-1995 welding technical conditions for newly built rolling stock

10.TB/ t2441-1993 technical conditions for assembly of rolling bearing axle box of diesel locomotive

11.TB/T 2817-1997 rolling steel integral vehicle technical conditions for railway vehicles

12.TB/T 2945-1999 LZ50 steel axles and billets for railway vehicles technical conditions

三、Main configuration

The diesel engine                      WD12.480 hangzhou steyer diesel engine

The transmission way                Hydraulic transmission

brake                                          Jz-7 brake

Braking way                              Air brake and hand brake

Coupling type                             Locomotive no.13 coupler

四、Main technical parameters

power                                                                     2x480 hp

Maximum traction                                                  264 kN

Maximum tonnage of traction (straight)           3400 t

A top speed of                                                        17 km/h

Continuous speed                                                    6 km/h

Through the minimum curve radius                        100 m

gauge                                                                      1435 mm

The wheel diameter                                                 1050 mm

The wheelbase                                                        2000 mm

distance                                                                   7200 mm

Axial flow type                                                             B-B

Coupler height                                                         880 mm±10 mm

Preparing a weight                                                   About 80 t

Length x width x height (mm)                                  15390×3150×4410

五、Main parameters of diesel engine

六、Main parameters of hydraulic torque converter

七、Hydraulic transmission

八、空气压缩机的主要技术参数

九、Towing tonnage list

Single unit towing tonnage list

Twin unit towing tonnage list

Note: the above traction tonnage table of traction locomotive is the traction weight without curve. If there are both ramps and curves, the traction weight will decrease with the curve radius.

十、Major outsourcing parts supporting manufacturers

十一、Quality assurance and technical service

1. The warranty period is one year. The calculation starts after the locomotive is transported to the test and acceptance.

2. The supplier shall be responsible for the reliability, integrity and performance of the locomotive.

3. During the warranty period of the locomotive, the supplier shall be responsible for the defects caused by the design, process and materials of the locomotive and correct them at its own expense.

4. The supplier shall provide free training for the passenger.

5. The supplier shall provide the user manual and relevant technical data free of charge.

6. During the warranty period, if there is any problem with the locomotive, the supplier shall send someone to the site to deal with the problem within 48 hours after receiving the notice from the buyer.

7. Upon expiration of the warranty period, the supplier shall provide technical services free of charge.

Type ZTYS1000 internal combustion locomotive (dual power)

A list of goods to be delivered on board

一、Consumable Part List

二、 Tool List

三、  File List

Type ZTYS1000 internal combustion locomotive (dual power)