TaicangZTY240 diesel locomotive

Taxonomy:TaicangInternal combustion traction locomotive single unit
Click times:
Date of release:2019/09/16
Specifications:
Type:
inquiry

introduce

Technical parameters and main configuration of ZTY240 diesel locomotive

Execution standard

1.JB/ t3247-1991 general technical conditions for industrial and mining diesel locomotive

2.TB/ t2494.1-1994 track vehicle axle ultrasonic inspection method

3.GB/ t3314-2006 general technical conditions for diesel locomotive

4.GB/ t3450-1994 "allowable noise value of locomotive driver's cab"

5.TB/ t449-2003 outline of wheel rim tread for rolling stock

6. TB/T 1025-2000 technical conditions for hot coil coil compression springs for rolling stock

7.TB/ t1444-2002 technical conditions for rubber seals for internal combustion engines in vehicles

8.TB/1463-2006 technical conditions for locomotive wheelset assembly

9. Tb1580-1995 welding technical conditions for newly built rolling stock

10.TB/ t2441-1993 technical conditions for assembly of rolling bearing axle box of diesel locomotive

11. TB/T 2817-1997 rolling steel integral vehicle technical conditions for railway vehicles

12.TB/T 2945-1999 LZ50 steel axles and billets for railway vehicles technical conditions

一、Main configuration

The diesel engine	WD615.58 hangzhou steyr diesel engine
The transmission way	Hydraulic transmission
brake	Jz-7 single machine brake
Braking way	Air brake
Coupling type	Locomotive no.2 hook

二、Main technical parameters

power	240 hp
Maximum tonnage of traction (straight)	800 t
Top speed	25km/h
Continuous speed	6 km/h
Through the minimum curve radius	30 m
gauge	1435 mm
The wheelbase	3000 mm
Axial series	B
Coupler height	880 mm±10 mm
Preparing a weight	About20 t
Wheel diameter	840 mm
Car Length, Width and Height (mm)	8546×2740×3000

三、Main parameters of diesel engine

model	WD615.58 G
Number of cylinders	6 pcs
The cylinder diameter	126㎜
trip	130㎜
Rated power/speed	175 kW(235hp)/2200 r/min
Minimum fuel consumption rate	205 g/kW.h
Start the way	Dc 24V electric start
Generator power	1000 W

四、Main parameters of hydrodynamic gearbox

model	ZTY240
Torque converter type	Double stage, double turbine
Maximum input power	175 kW
Maximum input speed	2200 r/min
Shift control mode	The electro-hydraulic reversing
gear	Forward, neutral, back

五、Air compressor

Air compressor

0.57 m³/min

六、Outsourcing parts supporting manufacturers

NO.	Name and model	Production factory,	To address
1	Hangfa steyr diesel wd615.58g	Sinotruk hangzhou engine co. LTD	Hangzhou
2	ZTY240 hydraulic endless transmission	Baoji China railway construction machinery co. LTD	Baoji
3	The axle of a locomotive vehicle	Taiyuan heavy industry wheel shaft co., LTD.	Taiyuan
4	840 ㎜ grinding steel wheels	Taiyuan heavy industry wheel shaft co., LTD.	Taiyuan
5	Locomotive front and rear axle drive box	Baoji China railway construction machinery co. LTD	Baoji
6	Transmission shaft	Xu chang drive shaft co. LTD	Xuchang
7	Locomotive bearing box bearing	Wafangdian bearing	Xuchang
8	JZ-7 Single Machine Motivation	The ministry of railways appoints manufacturers	Shenyang/Tianjing
9	Brake cylinder	The ministry of railways appoints manufacturers	Shenyang/Tianjing
10	Locomotive brake	Baoji China railway construction machinery co. LTD	Baoji
11	Electrical control system	Baoji China railway construction machinery co. LTD	Baoji
12	Locomotive 2 upper acting coupler	Designated manufacturer by ministry of railways	Shenyang/Tianjing
13	Bearing box mounting and damping system	Baoji China railway construction machinery co. LTD	Baoji
14	The frame	Baoji China railway construction machinery co. LTD	Baoji
15	Car body	Baoji China railway construction machinery co. LTD	Baoji

七、Towing tonnage list

i (The ramp) ‰	0	3	9	15	21	27	33
speedV(km/h)	Traction weight (t)
5	800	500	382	258	181	109	--
10	450	330	264	169	118	85	--
15	400	224	165	133	110	75	--
20	350	186	135	120	--	--	--
25	300	135	----	----	----	----	----

Note: the above traction tonnage table of traction locomotive is the traction weight without curve. If there are both ramps and curves, the traction weight will decrease with the curve radius.

八、Quality assurance and technical service

1. The warranty period is one year. The calculation starts after the locomotive is transported to the test and acceptance.

2. The supplier shall be responsible for the reliability, integrity and performance of the locomotive.

3. During the warranty period of the locomotive, the supplier shall be responsible for the defects caused by the design, process and materials of the locomotive and correct them at its own expense.

4. The supplier shall provide training personnel for free and provide operating instructions and relevant technical data for free.

5. During the warranty period, if there is any problem with the locomotive, the supplier shall send someone to the site to deal with the problem within 48 hours after receiving the notice from the buyer.

6. Upon expiration of the warranty period, the supplier shall provide technical services free of charge.

ZTY240 internal combustion traction locomotive with goods distribution details

一、Consumable Part List

NO.	Tool Name	Specification Model	Unit	Quantity
1	Spare parts for engine		Sets	1
2	Oil seal	60×80×12	Pcs	2
3	The relief valve		Pcs	1
4	Start button	LA38-11/204	Pcs	1
5	Air switch	1P6A	Pcs	1
6	Air switch	2P30A	Pcs	1
7	Air switch	1P20A	Pcs	1
8	Brake cylinder leather bowl	152×203	Pcs	2
9	Reversing solenoid valve	4V 210-08 DV24V	Pcs	2
10	Horn solenoid valve	3V 210-08 DV24V	Pcs	1

二、 Tool List

No.	Tool Name	Specification	unit	Quantity
1	Box wrench	5.5×7 8×10 10×12 12×14 14×17 17×19 19×22 24×27	Pcs	8
2	Open end wrench	5.5×7 8×10 10×12 12×14 14×17 17×19 19×22 24×27	Pcs	8
3	Socket wrench	12.5 ㎜ metric 32	Sets	1
4	Adjustable wrench	300㎜	Pcs	1
5	Cutting pliers	200㎜	Pcs	1
6	Screwdriver	“十”字250㎜	Pcs	1
7	Screwdriver	“一”字250㎜	Pcs	1