ZTYS480 internal combustion locomotive (dual power)

Operating conditions, technical parameters and main configuration

ZTYS480 internal combustion traction locomotive (dual power) is our company's patented product, patent number: ZL2010 2 000223694.2, since the product launched into the market has been widely recognized.

ZTYS480 internal combustion locomotive (double power) is equipped with driver's cab, machine room, frame, power system, transmission system, running gear system, braking system, etc. It consists of two systems of the same power. It can be operated independently by a single engine unit with a power of 240 horsepower/single unit and a maximum traction tonnage of 902 tons, or by two units working together with a power of 480 horsepower/double unit and a maximum traction tonnage of 2000 tons.

二、Execution standard

1.JB/ t3247-1991 general technical conditions for industrial and mining diesel locomotive

2.TB/ t2494.1-1994 track vehicle axle ultrasonic inspection method

3.GB/ t3314-2006 general technical conditions for diesel locomotive

4.GB/ t3450-1994 "allowable noise value of locomotive driver's cab"

5.TB/ t449-2003 outline of wheel rim tread for rolling stock

6.TB/ t1025-2000 technical conditions for hot coil coil compression springs for rolling stock

7.TB/ t1444-2002 technical conditions for rubber seals for internal combustion engines in vehicles

8.TB/1463-2006 technical conditions for locomotive wheelset assembly

9. Tb1580-1995 welding technical conditions for newly built rolling stock

10.TB/ t2441-1993 technical conditions for assembly of rolling bearing axle box of diesel locomotive

11. TB/T 2817-1997 rolling steel integral vehicle technical conditions for railway vehicles

12.TB/T 2945-1999 LZ50 steel axles and billets for railway vehicles technical conditions

三、Main configuration

The diesel engine                     Wd615.58g hangfa steyr diesel engine (2 sets)

The transmission way                Hydraulic transmission and torque converter (2 sets)

Air compressor                          0.57 m³/min（2 sets）

brake                                        Jz-7 brake (2 sets)

Control form                             Both ends of control

Braking way                             Air brake and hand brake

Coupling type                          Locomotive 13# with coupler

四、Main technical parameters

power                                                          480(240x2) hp

Maximum tonnage of traction (straight)      1600 t

Top speed                                                   31 km/h

Continuous speed                                       7 km/h

Minimum sustained speed                          6 km/h

Through the minimum curve radius            60 m

gauge                                                         1435 mm

Bogie spacing                                             7200 mm

The wheelbase                                           2100 mm

The wheel diameter                                 840 mm

Axle load                                                    About 12.5 t

Axial series                                                B-B

Coupler height                                           880 mm±10 mm

Preparing a weight                                     About 50 t

Car Length, Width and Height (mm)          12986×3000×3900

五、Main engine parameters

六、Main parameters of hydraulic torque converter

七、Hydraulic transmission

八、Main Technical Parameters of Single Air Compressor

九、Towing tonnage calculation sheet

Single unit towing tonnage list

Twin unit towing tonnage list

Note: the above traction tonnage table of traction locomotive is the traction weight without curve. If there are both ramps and curves, the traction weight will decrease with the curve radius.

十、Major outsourcing parts supporting manufacturers

十一、Quality assurance and technical service

1. The warranty period is one year. The calculation starts after the locomotive is transported to the test and acceptance.

2. The supplier shall be responsible for the reliability, integrity and performance of the locomotive.

3. During the warranty period of the locomotive, the supplier shall be responsible for the defects caused by the design, process and materials of the locomotive and correct them at its own expense.

4. The supplier shall provide free training for the passenger.

5. The supplier shall provide the user manual and relevant technical data free of charge.

6. During the warranty period, if there is any problem with the locomotive, the supplier shall send someone to the site to deal with the problem within 48 hours after receiving the notice from the buyer.

7. Upon expiration of the warranty period, the supplier shall provide technical services free of charge.

ZTYS480 internal combustion locomotive (dual power)

A list of goods to be delivered on board

一、Consumable Part Lis

二、Tool List

三、File List

ZTYS480 internal combustion locomotive (dual power)）