ZTY420 diesel locomotive

Technical parameters and main configuration

Execution standard

1.JB/ t3247-1991 general technical conditions for industrial and mining diesel locomotive

2.TB/ t2494.1-1994 track vehicle axle ultrasonic inspection method

3.GB/ t3314-2006 general technical conditions for diesel locomotive

4.GB/ t3450-1994 "allowable noise value of locomotive driver's cab"

5.TB/ t449-2003 outline of wheel rim tread for rolling stock

6.TB/ t1025-2000 technical conditions for hot coil coil compression springs for rolling stock

7.TB/ t1444-2002 technical conditions for rubber seals for internal combustion engines in vehicles

8.TB/1463-2006 technical conditions for locomotive wheelset assembly

9. Tb1580-1995 welding technical conditions for newly built rolling stock

10.TB/ t2441-1993 technical conditions for assembly of rolling bearing axle box of diesel locomotive

11. TB/T 2817-1997 rolling steel integral vehicle technical conditions for railway vehicles

12.TB/T 2945-1999 LZ50 steel axles and billets for railway vehicles technical conditions

一、Main configuration

The diesel engine                             WD12.420 hangfa (steyr) diesel engine

The transmission way                         Hydraulic transmission

brake                                                   Jz-7 single machine brake

Braking way                                        Air brake and hand brake

Coupling type                                      Locomotive 13 upper acting coupler

二、Main technical parameters

power                                                                      420 hp

Maximum tonnage of traction (straight)  ）             1706 t

A top speed of                                                         15 km/h

Through the minimum curve radius                         60 m

gauge                                                                      1435 mm

The wheelbase                                                       1800 mm

distance                                                                 5000 mm

Axial series                                                              B-B

Coupler height                                                        880 mm±10 mm

Preparing a weight                                                 About42 t

The wheel diameter                                             840 mm

Car Length, Width and Height (mm)                                  11380×3000×3900

三、Main parameters of diesel engine

四、Main parameters of hydraulic torque converter

五、Hydraulic stepless transmission

六、Air compressor

七、Traction characteristics of traction locomotive

Traction tonnage list for traction locomotive

Note: the above traction tonnage table of traction locomotive is the traction weight without curve. If there are both ramps and curves, the traction weight will decrease with the curve radius

八、Major outsourcing parts supporting manufacturers

九、Quality assurance and technical service

1. The warranty period is one year. The calculation starts after the locomotive is transported to the test and acceptance.

2. The supplier shall be responsible for the reliability, integrity and performance of the locomotive.

3. During the warranty period of the locomotive, the supplier shall be responsible for the defects caused by the design, process and materials of the locomotive and correct them at its own expense.

4. The supplier shall provide free training for the passenger.

5. The supplier shall provide the user manual and relevant technical data free of charge.

6. During the warranty period, if there is any problem with the locomotive, the supplier shall send someone to the site to deal with the problem within 48 hours after receiving the notice from the buyer.

7. Upon expiration of the warranty period, the supplier shall provide technical services free of charge.

ZTY420 diesel locomotive

Details of goods to be delivered on board

一、 Consumable Part List

二、Tool List

三、File List

 ZTY420 diesel locomotive